Start with the recommended baseline, change one value at a time, and test each adjustment under consistent conditions.
Predator S29 is an advanced Apex Legends Cronus Zen script featuring configurable aim assistance, weapon-specific recoil profiles, automatic weapon detection, movement mods and controller sensitivity options.
For the best starting experience, we recommend keeping the script on its original default values. These settings provide a balanced baseline before making weapon-specific or controller-specific adjustments.
Best Predator S29 Aim Assist Values
Use the following factory values inside the Aim Assist settings:
| Setting | Recommended Value |
|---|---|
| Left Analog | 18 |
| Radius Aim | 11 |
| General | 11 |
| Stick Drift | 5 |
| Humanize | Off |
| Auto Aim Mod | Off |
The Left Analog, Radius Aim and General values control the main aim-assist behaviour built into Predator S29.
A Radius Aim value of 11 keeps the aim pattern controlled, while the General value of 11 provides a balanced baseline without making normal right-stick movement excessively aggressive.
The script’s Stick Drift value is set to 5 by default. This is an internal script value and should not automatically be copied into the Apex Legends in-game deadzone option.
Recommended Aim Timing Values
The default timing configuration is:
| Setting | Recommended Value |
| Hold | 100 |
| Time | 260 |
| Speed | 110 |
| Delay | 230 |
| Value Limit | 90 |
These timing values should remain unchanged when first using the script. Increasing or decreasing several timing options at once can make it difficult to identify which setting changed the controller response.
Test the factory configuration before making any adjustment.
Best Predator S29 Recoil Settings
Predator S29 contains individual recoil patterns for supported Apex Legends weapons. The script includes profiles for weapons such as:
- R-301
- Flatline
- Nemesis
- Spitfire
- G7 Scout and 30-30 Repeater
- Hemlok
- L-Star
- Havoc
- Devotion
- Rampage
- R-99
- Volt
- CAR
- Prowler
- Alternator
- RE-45
Use the following default recoil configuration:
| Setting | Recommended Value |
| Edit Vertical | 0 |
| Edit Horizontal | 0 |
| Edit Scope | 0 |
| Edit Hypfire | 0 |
| Auto Detect | Off |
| Game Rumble | On |
| Auto Resync | Off |
The weapon profiles already contain their own built-in recoil data. The Vertical, Horizontal, Scope and Hypfire editing values are therefore set to zero by default.
Leaving these values at zero means the original weapon profile remains unchanged.
Game Rumble
Game Rumble is enabled by default. Predator S29 can use controller vibration as part of its weapon-detection and firing logic.
Make sure vibration is also enabled inside Apex Legends when relying on rumble-based script functions.
Auto Detect
Auto Detect is disabled by default.
This provides predictable manual weapon selection and avoids unintended profile changes. Players who understand the script’s rumble detection system can test Auto Detect later, but the original Off setting is the safest starting point.
Auto Resync
Auto Resync is also disabled by default. Keep it off initially and manually confirm that the Primary and Secondary weapon profiles match your current loadout.
Best Sensitivity Settings
Predator S29’s factory sensitivity configuration is:
| Setting | Recommended Value |
| Look Sensitivity | 4 |
| ADS Sensitivity | 3 |
| Response Curve | Classic |
| Deadzone Preset | None |
| Yaw Adjustment | 0 |
| Pitch Adjustment | 0 |
| ADS Yaw Adjustment | 0 |
| ADS Pitch Adjustment | 0 |
| Response Adjustment | 0 |
The script is configured around a standard 4 Look Sensitivity, 3 ADS Sensitivity, Classic Response Curve and None Deadzone starting setup.
Using matching in-game settings is important because the built-in recoil profiles and aim behaviour can respond differently when the sensitivity or response curve is changed.
Recommended Apex Legends In-Game Baseline
Start with:
- Look Sensitivity: 4
- ADS Sensitivity: 3
- Response Curve: Classic
- Look Deadzone: None
- Vibration: On
The uploaded script does not provide a complete set of separate in-game video, field-of-view or per-optic sensitivity recommendations. Keep those settings at your normal preferences unless you have a tested configuration.
Best Crouch and Strafe Values
Use the following defaults:
| Setting | Recommended Value |
| Crouch Time | 110 |
| Crouch Mod | Always Active |
| Strafe Time | 700 |
| Strafe Mod | Always Active |
The default Crouch and Strafe modes are set to Always Active.
The Crouch Time of 110 provides a short input duration, while the Strafe Time of 700 controls the longer automated movement interval.
Keep these values unchanged until you have tested how they interact with your controller layout.
Best Armor Swap Values
Use these default armor settings:
| Setting | Recommended Value |
| Armor Time | 100 |
| Armor Mod | Normal |
| Armor Box | Off |
The normal Armor Mod is the standard factory configuration. Additional armour-swap behaviour is available in the script, but it should remain disabled until the basic controller layout and menu controls have been tested.
Recommended Optional Mod Settings
Predator S29 loads most optional automation mods in the Off position:
| Optional Mod | Default |
| Auto Ping | Off |
| Inspect | Off |
| Crouch Spam | Off |
| Bunny Hop | Off |
| Wall Jump | Off |
| Auto Aim | Off |
| Crouch Shot | Off |
| Strafe Shot | Off |
| Fast Reload | Off |
| Fire Limit | Off |
| Jump Spam | Off |
| Armor Box | Off |
| Zip Jump | Off |
| Pad Rumble Mod | Off |
| Humanize | Off |
This is a sensible starting configuration because it prevents several automated actions from running simultaneously.
Enable optional mods individually rather than activating everything at once. This makes it easier to test each feature and prevents movement or reload automation from interfering with normal gameplay.
Other Default Options
| Setting | Recommended Value |
| Inspect Mod | Hands |
| Target | Wall |
| Reload Plus | None |
| Button Layout | Default |
| Selected Legend | None |
| Inverted Aim | Normal |
The script supports alternative button layouts and several Legend-specific functions. However, the factory configuration starts with the standard layout and no Legend-specific option selected.
Only change the button layout when it matches the layout selected inside Apex Legends.
Complete Recommended Predator S29 Configuration
For the best default setup, use:
- Left Analog: 18
- Radius Aim: 11
- General: 11
- Stick Drift: 5
- Hold: 100
- Time: 260
- Speed: 110
- Delay: 230
- Value Limit: 90
- Look Sensitivity: 4
- ADS Sensitivity: 3
- Response Curve: Classic
- Deadzone: None
- Crouch Time: 110
- Crouch Mod: Always Active
- Strafe Time: 700
- Strafe Mod: Always Active
- Armor Time: 100
- Armor Mod: Normal
- Game Rumble: On
- Auto Detect: Off
- Auto Resync: Off
- Vertical Adjustment: 0
- Horizontal Adjustment: 0
- Scope Adjustment: 0
- Hypfire Adjustment: 0
- Yaw and Pitch Adjustments: 0
- Optional movement and shot mods: Off
How to Adjust Predator S29 Safely
Begin by testing the original settings without making any changes.
When adjusting the script:
- Change only one value at a time.
- Test the value with the same weapon and attachments.
- Make small adjustments rather than large jumps.
- Confirm the correct Primary or Secondary profile is selected.
- Resync the weapon profiles after changing weapons.
- Keep the selected script sensitivity matched with Apex Legends.
Weapon attachments, optics, controller condition and stick drift can all affect the final result.
Final Recommendations
The default Predator S29 values provide the best general-purpose starting point because they preserve the script’s original weapon profiles and intended sensitivity configuration.
Most players should begin with 4 Look Sensitivity, 3 ADS Sensitivity, Classic Response Curve, None Deadzone and vibration enabled.
Keep the recoil adjustment fields at zero until you identify a specific weapon that requires correction. Optional movement and firing mods should also remain disabled until each feature has been tested individually.
