Best Panda Aim V8 Values for Black Ops 7 Cronus Zen

Panda Aim V8 is a Black Ops 7 Cronus Zen script featuring configurable aim assistance, anti-recoil weapon profiles, anti-drift calibration, rapid fire, movement mods, controller customization and three gameplay profiles.

For the best starting configuration, use the script’s original fresh-reset values. These defaults load balanced aim parameters while leaving Aim Assist, Anti-Recoil and most automated mods disabled until they are deliberately enabled.

Best Panda Aim V8 Aim Assist Values

Use the following factory configuration:

These values are loaded into all three gameplay profiles:

• Primary
• Secondary
• Universal

Although Aim Assist begins Off, its numerical Radius, Speed and Boost values are already configured. Enabling Aim Assist therefore activates the script using the factory values shown above.

Aim Shape: Circle

The default Aim Shape is Circle.

Available shapes include:

• Circle
• Ellipse
• Oval
• Lemniscate
• Orbit
• Rose

Circle is the safest general starting shape because it uses the script’s standard rotational aim pattern without introducing one of the more specialized trajectories.

Aim Radius: 9

Aim Radius controls the size of the main right-stick assistance pattern.

The factory value is 9, which keeps the base pattern relatively compact. Larger values widen the pattern and may create more visible right-stick movement.

Start with 9 before making any adjustment.

Aim Speed: 19

Aim Speed is set to 19.

This controls how quickly the main pattern progresses. The script also adds small randomized variations to its Radius and Speed calculations, so the active values may move slightly around the configured settings.

Keep Aim Speed at 19 during initial testing.

Boost Radius and Speed

Use:

The Boost values are added to the base Aim Radius and Aim Speed under the script’s applicable activation conditions.

With the factory configuration, the calculated pattern can use approximately:

• Base Radius: 9
• Boosted Radius: 29 before random variation
• Base Speed: 19
• Boosted Speed: 42 before random variation

The script clamps its calculated values to supported ranges.

Best Hip Assist Values

Use:

Hip Assist is disabled by default.

Its numerical values remain stored so the feature can be enabled later without configuring it from zero.

Keep Hip Assist Off initially because hip-fire assistance can affect normal camera movement when the player is not aiming down sights.

Best Strafe Assist Values

Use:

Strafe Assist is disabled by default.

The script chooses a different Strafe Time according to the connected controller:

• PlayStation controller: 7
• Xbox controller: 4

This value is multiplied by the device runtime interval when the script prepares its internal strafe timing.

Do not manually copy the PlayStation value to Xbox or the Xbox value to PlayStation when reproducing the original configuration.

Best Anti-Drift Settings

Use:

The Anti-Drift system begins disabled.

Panda Aim V8 includes tools for:

• Controller calibration
• Drift testing
• Drift reset
• Viewing Left, Right, Up and Down drift values

These calibration values should not be copied from another controller. They are designed to be measured using the individual controller connected to the Cronus Zen.

Keep Anti-Drift Off unless the controller has measurable stick drift.

Best Panda Aim V8 Anti-Recoil Values

Use the following fresh-reset configuration:

Anti-Recoil is disabled in all three profiles on a fresh reset.

The zero Vertical and Horizontal values mean the script does not apply a general recoil correction until the feature is configured.

Anti-Recoil Activation Modes

The script includes several Anti-Recoil modes and supports standard and more advanced weapon behavior.

For the factory configuration, leave Anti-Recoil Off.

When configuring it later, test one weapon at a time and verify that the correct Primary, Secondary or Universal profile is selected.

Human Logic and Recoil Curves

Human Logic begins Off, and all of its associated curve values begin at zero:

• Kick Vertical
• Kick Time
• Vertical Start
• Vertical Mid
• Vertical End
• Vertical Start Time
• Vertical Mid Time
• Horizontal Start
• Horizontal Mid
• Horizontal End
• Horizontal Start Time
• Horizontal Mid Time

These controls allow the script to change recoil correction during different stages of sustained firing.

Because every curve value begins at zero, the fresh configuration does not apply a custom multi-stage recoil pattern.

Default Weapon Selection

The first weapon entry is selected by default:

ARK M1

The source contains a large list of individual weapon profiles, including standard and rapid-fire variants.

Examples include:

• AK-72
• Carben57
• Cuda 9
• Drevek45
• DS20 Mirror
• Ecko 12
• Jegr 45
• KOGT-7
• M10 Beach
• M15 Mid
• M34 Neva
• MBA1
• Maddus RFB
• Mk87
• MCP-25
• MRX-71
• Raze 9m
• RK.9
• Ryden 45K
• SKL 545
• Sturm45
• XM352
• X3R-OIN
• Velux 57
• Worden 308

Several weapons also have separate RF entries.

Selecting ARK M1 does not automatically apply recoil in the factory configuration because Anti-Recoil remains Off and the editable weapon values begin at zero.

Best Controller Settings

Use:

Button Layout

The factory Button Layout is Default.

The script contains several alternative layouts, including tactical, left-handed, bumper-jumper and custom variants.

Keep the script layout matched with the layout selected inside Black Ops 7.

Deadzone Values

The script’s Left and Right Deadzone values begin at zero.

These are internal Panda Aim V8 settings and should not automatically be copied into the separate in-game deadzone settings.

Slide/Dive

The default Slide/Dive selection is:

Tap to Slide

Other available choices include:

• Tap to Dive
• Slide Only
• Dive Only
• Hybrid

Use Tap to Slide to reproduce the source’s original controller configuration.

Stick Layout

Stick Layout begins on Default.

The source supports several layouts, including Southpaw and Legacy variants. Keep Default unless the in-game stick layout has also been changed.

Best Gyroscope Settings

Use:

All gyroscope tilt actions begin Off.

The script can assign actions such as Drop Shot, Jump Shot or Slide to controller tilt directions, but none are enabled in the factory configuration.

Keeping them Off prevents physical controller movement from triggering an unintended gameplay action.

Best Panda Aim V8 Mod Settings

Use the following defaults:

Every optional gameplay mod begins disabled or at its zero setting.

This is the best general starting configuration because it prevents multiple automated inputs from activating simultaneously.

Akimbo

Akimbo begins at zero, which keeps its synchronized trigger routine inactive.

The active Akimbo routine can pulse the aim and firing triggers using a value-dependent timing calculation. Leave it Off unless it is being configured for a compatible dual-wield setup.

Auto ADS/Fire

Auto ADS/Fire begins Off.

The available behavior includes options associated with:

• ADS on Fire
• Fire on ADS

Off preserves normal independent control over the aim and fire triggers.

Auto Focus

Auto Focus is Off.

Keep it disabled until its behavior has been tested with a compatible weapon or aiming setup.

Auto Ping

Auto Ping is Off in the factory profiles.

Enabling it can generate automatic ping inputs during its applicable activation conditions. Leave it disabled to prevent unwanted markers.

Bunny Hop

Bunny Hop is Off.

When enabled, it can generate repeated jump inputs while movement conditions are met. Off preserves standard manual jumping.

Dive Cancel and Slide Cancel

Both Dive Cancel and Slide Cancel begin disabled.

The source includes short timed input sequences for movement cancellation, but their usefulness depends on the selected controller layout and current game movement mechanics.

Easy Drop Shot

Easy Drop Shot is Off.

When enabled, it can combine firing conditions with an automated crouch or prone-related input.

Leave it Off for the default configuration.

Fast Melee and Easy Melee Swap

Both melee-related options are Off.

This prevents Panda Aim V8 from automatically changing weapons or modifying melee timing.

Rapid Fire

Rapid Fire begins Off.

The script includes normal and weapon-specific rapid-fire support, but it should only be enabled for a compatible semi-automatic weapon.

Leaving Rapid Fire active with the wrong weapon can interfere with normal firing.

Shot Mod

Shot Mod begins Off.

Its selectable behaviors include:

• Off
• Drop Shot
• Jump Shot
• Slide

Off is the safest universal value.

Snake and YY

Snake and YY are both disabled.

These movement and weapon-swap macros should remain Off until their inputs have been tested with the selected button layout.

Best Profile Settings

Panda Aim V8 contains three gameplay profiles:

1. Primary
2. Secondary
3. Universal

The default active profile is Primary.

All three profiles begin with the same aim values:

This makes the Primary profile the best place to preserve the original configuration while alternative values are tested in Secondary or Universal.

Profile Controls

Use:

The first three profile-control buttons are unassigned on a fresh reset.

Vehicle Mode is assigned to D-pad Right by the reset routine.

When setting custom profile buttons, avoid assigning the same button to several different functions.

System Settings

Use:

Block Vibration

Block Vibration is Off.

The script can read controller rumble for weapon and firing-related behavior. Blocking vibration may change how those features operate.

Device VM AimSpeed

Device VM AimSpeed is set to Automatic.

The menu also includes manual speed selections. Automatic allows the source to choose its standard device timing rather than forcing a manual VM value.

Complete Recommended Panda Aim V8 Configuration

Aim Assist

• Aim Assist V8: Off
• Aim Shape: Circle
• Aim Radius: 9
• Aim Speed: 19
• Boost Radius: 20
• Boost Speed: 23
• Hip Assist: Off
• Hip Radius: 4
• Hip Speed: 10
• Strafe Assist: Off
• Strafe Radius: 30
• Strafe Time: 7 on PlayStation or 4 on Xbox

Anti-Drift

• Anti-Drift: Off
• Calibration: Not run
• Stored Drift Values: 0

Anti-Recoil

• Anti-Recoil: Off
• Vertical: 0
• Horizontal: 0
• Human Logic: Off
• Kick and curve values: 0
• Weapon: ARK M1
• Weapon Vertical: 0
• Weapon Horizontal: 0

Controller

• Button Layout: Default
• Bumper Ping: Off
• Left Deadzone: 0
• Right Deadzone: 0
• Flipped: Off
• Hair Triggers: Off
• Inverted: Off
• Slide/Dive: Tap to Slide
• Stick Layout: Default

Gyroscope

• Tilt Back: Off
• Tilt Forward: Off
• Tilt Left: Off
• Tilt Right: Off

Optional Mods

• Akimbo: Off
• Auto ADS/Fire: Off
• Auto Focus: Off
• Auto Ping: Off
• Bunny Hop: Off
• Dive Cancel: Off
• Easy Drop Shot: Off
• Easy Melee Swap: Off
• Fast Melee: Off
• Rapid Fire: Off
• Shot Mod: Off
• Slide Cancel: Off
• Snake: Off
• YY: Off

Profiles and System

• Active Profile: Primary
• Resync Button: Unassigned
• Profile Swap: Unassigned
• Universal Profile Button: Unassigned
• Vehicle Mode: D-pad Right
• Block Vibration: Off
• Device VM AimSpeed: Automatic

How to Open the Panda Aim V8 Menu

Use:

Hold L2 or LT and press Options or Menu.

Inside the OLED menu:

• Use the D-pad to navigate categories and settings.
• Press Cross or A to select an option.
• Use Left and Right to adjust supported values.
• Press Circle or B to return.
• Exiting the menu saves the current configuration.

The menu contains the following main categories:

• Aim Assist
• Anti-Drift
• Anti-Recoil
• Controller
• Gyroscope
• Options
• Profiles
• Settings
• Toggles

How to Restore the Factory Values

To reproduce the original setup:

1. Reset the saved Panda Aim V8 configuration.
2. Use Primary as the active profile.
3. Keep all main toggles Off.
4. Set Aim Shape to Circle.
5. Enter the factory aim values.
6. Use Strafe Time 7 on PlayStation or 4 on Xbox.
7. Keep every recoil value at zero.
8. Leave the first weapon selected as ARK M1.
9. Use the Default controller and stick layouts.
10. Keep Device VM AimSpeed on Automatic.

Saved persistent values can override the source’s fresh-reset configuration.

How to Adjust Panda Aim V8

Begin with the factory values and change only one setting at a time.

When tuning the script:

1. Preserve Primary as the original baseline.
2. Test alternative values in Secondary.
3. Enable Aim Assist before adjusting its Radius or Speed.
4. Adjust Aim Radius in small steps.
5. Test Boost settings separately from the base values.
6. Configure Anti-Recoil for one weapon at a time.
7. Keep Horizontal Recoil at zero unless sideways correction is required.
8. Calibrate Anti-Drift only for the connected controller.
9. Enable only one movement mod at a time.
10. Match the script’s controller layout with Black Ops 7.

Weapon attachments, optics, sensitivity, response curve, deadzones and controller condition can all affect the final result.

Final Recommendations

The best Panda Aim V8 starting values are its original factory settings.

The most important values are:

• Aim Shape: Circle
• Aim Radius: 9
• Aim Speed: 19
• Boost Radius: 20
• Boost Speed: 23
• Hip Radius: 4
• Hip Speed: 10
• Strafe Radius: 30
• Strafe Time: 7 on PlayStation or 4 on Xbox
• Vertical Recoil: 0
• Horizontal Recoil: 0
• Device VM AimSpeed: Automatic

Aim Assist, Anti-Recoil, Anti-Drift, Rapid Fire and automated movement options all begin disabled.

This allows players to enable and test each major function individually instead of loading several controller modifications at the same time.

Use controller scripts in accordance with the rules of the game, platform and online service you are using.