Best Acid Aim+ V2 Values for Destiny 2 Cronus Zen

Acid Aim+ V2 is a Destiny 2 Cronus Zen script featuring aim assistance, recoil control, rapid fire, predictive stick adjustment, adaptive recoil, movement mods and several controller customization options.

For the best starting configuration, use the script’s original factory values. These defaults enable its primary aiming, recoil and rapid-fire systems while leaving most optional movement macros disabled.

Best Acid Aim+ V2 Aim Assist Settings

Use the following default values:

Aim Assist activates while L2 is held beyond 50% and the right-stick input remains inside the selected Lock Range.

Aim Strength: 100

Aim Strength is set to its maximum factory value of 100.

The script uses this value when calculating how strongly it modifies right-stick movement inside the Lock Range. Keep the default value during initial testing before reducing it in small increments if the response feels too strong.

Lock Range: 25

Lock Range determines the right-stick input area in which the aim-assist calculation can operate.

The script allows values from 10 to 50, with 25 selected by default. This provides a middle-range starting point rather than using the widest available activation area.

Aim Pattern: Micro Adjust

The available menu choices are:

• None
• Micro Adjust
• Track Assist
• Predict

Micro Adjust is selected by default.

In this particular source version, the selected Aim Pattern does not switch between four separate aim-assist movement patterns. Instead, the value is referenced later as an additional recoil multiplier after the aim timer has been active.

For that reason, Micro Adjust should remain selected as the factory value, but users should not expect four completely different aim engines from this menu alone.

Aim Speed: 20

Aim Speed is set to 20, the highest value in its available 5–20 range.

The source uses Aim Speed with Auto Adjust when calculating a dynamic sensitivity multiplier after the aim system has been active for a period.

AI Learning and Prediction Defaults

Acid Aim+ V2 enables several advanced options by default:

AI Learning

AI Learning is enabled.

The script records internal aiming and streak-related values and can add an aim-strength bonus after its calculated streak exceeds three.

This is an internal adaptation system based on controller activity and script-calculated statistics. It does not receive actual game telemetry or confirm real enemy hits.

Predict Enable

Prediction is enabled with a Strength value of 70.

The script measures recent right-stick velocity and adds a portion of that movement back into its aim calculation.

Auto Adjust

Auto Adjust is enabled and uses the internal Aim Stability measurement together with Aim Speed to alter its sensitivity calculation.

Track Stats

Track Stats is enabled.

The script creates internal values for shots, calculated accuracy, streaks and consistency. These are estimates based on controller inputs and stick position, not verified match statistics from Destiny 2.

Best Recoil Control Values

Use the following factory configuration:

Recoil Control activates whenever R2 is held beyond 50%. The source does not require L2 to be held at the same time.

Recoil Vertical: 15

The default Vertical value is 15.

The visible menu advertises an adjustable range from 5 to 50. However, the persistent-variable loading code uses 15 as its maximum accepted stored value.

This creates an inconsistency in the uploaded source:

• The menu can display and save values above 15.
• The reload code only accepts a stored range up to 15.
• Values above 15 may therefore fail to reload as expected after restarting the script.

For the most reliable configuration, keep Vertical Recoil at its original value of 15.

Recoil Horizontal: 0

Horizontal Recoil is set to zero.

No sideways correction is applied while the Recoil Pattern remains Vertical. Horizontal correction becomes relevant only when Left Drift or Right Drift is selected.

Recoil Pattern: Vertical

Available options are:

• Vertical
• Left Drift
• Right Drift

Vertical is the factory selection.

Use Left Drift only when a weapon consistently moves left and Right Drift only when it consistently moves right.

Adaptive Recoil

Adaptive Recoil is enabled by default.

After the script has registered more than ten shots, it can increase or decrease its Vertical correction according to its internally calculated accuracy. This calculation is based on stick position rather than confirmed in-game hits.

Best Rapid-Fire Settings

Use:

Rapid Fire is enabled by default and runs whenever R2 is held beyond 50%.

Important Rapid Speed Detail

The menu displays a Rapid Speed value of 12 with an adjustable range of 8–20.

However, the active Rapid Fire combo does not reference that setting. It uses a fixed sequence:

• R2 released for 30ms
• R2 pressed for 30ms

Changing Rapid Speed in the menu does not change the active 30ms/30ms pulse in this uploaded version.

Smart Burst

Smart Burst is disabled by default.

When enabled, the script counts firing activations and attempts to pause after three recorded shots. Leave it Off for the original configuration.

Best Movement Settings

Use the following defaults:

Most movement macros are disabled by default, which preserves normal controller behaviour.

Auto Reload

Auto Reload is Off.

When enabled, the script waits while R2 remains released and then generates a Square press after its internal timer exceeds 180 processing cycles.

Drop Shot

Drop Shot is Off.

When enabled, pressing R2 starts a short Circle input.

Jump Shot

Jump Shot is Off.

When enabled, pressing R2 while Cross is held generates another short Cross input.

Slide Cancel

Slide Cancel is Off.

When enabled, holding L3 repeatedly starts a sequence containing Circle, a short delay and Cross.

Auto Sprint

Auto Sprint is Off.

When enabled, strong vertical left-stick movement causes the script to output L3 after an internal delay.

The menu also displays three Sprint Modes:

• Auto
• Hold L3
• Directional

Auto is the factory selection, but the active Auto Sprint logic does not reference the Sprint Mode setting. The three menu choices do not change the implemented sprint behaviour in this source.

Strafe Assist

Strafe Assist is Off with Strafe Speed set to 15.

When enabled, sufficiently strong horizontal left-stick movement receives an additional value of 10 in the same direction after the Strafe Speed timer is reached.

Controller and Sensitivity Defaults

The factory controller values are:

These values appear in the OLED menu, but most are not connected to active controller-processing logic in the uploaded version.

The following settings are menu-only in this source:

• Sensitivity Curve
• Left and Right Deadzone
• Left and Right Response
• ADS, Hip and Scope Sensitivity
• Hair Triggers
• Gyro and Gyro Sensitivity
• Button Swap
• Stick Swap
• Trigger Swap
• Rumble
• Vibration

Changing them updates the menu value during the current session but does not alter active controller output in the supplied code.

The Deadzone values are also internal menu values and should not automatically be copied into Destiny 2’s in-game settings.

LED and Profile Defaults

The LED menu lists:

• Off
• Solid
• Pulse
• Cycle

Solid is selected by default.

However, the main script calls its LED cycling function continuously regardless of the selected LED Mode, brightness or Advanced LED option. In this source version, the menu settings do not fully control the active LED behaviour.

The script also lists four profiles, with Profile 1 selected by default. No separate per-profile configuration loading or saving is implemented in the uploaded source, so changing the Profile Number does not load a different bank of settings.

Optional Menu Features Disabled by Default

The following options begin in the Off position:

Several of these options are displayed in the menu but have no active gameplay logic in the supplied source.

The menu-only entries include:

• Turbo L1
• Turbo R1
• Turbo Square
• Turbo Circle
• Reload Cancel
• Quick Scope
• Breath Control
• Ping Spam
• Crouch Spam
• Auto Lean
• Quick Knife

Breath Control is On by default, but no active Breath Control routine references it.

Panic Mode

Panic Mode is disabled by default.

When enabled, pressing L3 and R3 together toggles an internal Panic state. Activating it directly changes:

• Aim Strength to 100
• Recoil Vertical to 50

The code does not restore the previous values when Panic Mode is toggled off. It also changes Recoil Vertical to a value above the persistent loader’s stated maximum of 15.

For a stable default configuration, leave Panic Mode Off.

Complete Acid Aim+ V2 Default Values

Aim and Recoil

• Aim Assist: On
• Aim Strength: 100
• Lock Range: 25
• Aim Pattern: Micro Adjust
• Aim Speed: 20
• Recoil Control: On
• Recoil Vertical: 15
• Recoil Horizontal: 0
• Recoil Pattern: Vertical
• Adaptive Recoil: On

Firing

• Rapid Fire: On
• Rapid Speed Display Value: 12
• Actual Rapid-Fire Pulse: 30ms Off / 30ms On
• Smart Burst: Off

Movement

• Auto Reload: Off
• Reload Cancel: Off
• Drop Shot: Off
• Jump Shot: Off
• Slide Cancel: Off
• Auto Sprint: Off
• Sprint Mode: Auto
• Quick Scope: Off
• Breath Control: On
• Ping Spam: Off
• Crouch Spam: Off
• Strafe Assist: Off
• Strafe Speed: 15
• Auto Lean: Off
• Quick Knife: Off

Sensitivity and Controller

• Sensitivity Curve: Linear
• Deadzone Left: 5
• Deadzone Right: 5
• Response Left: 100
• Response Right: 100
• Hair Trigger L: Off
• Hair Trigger R: Off
• ADS Sensitivity: 100
• Hip Sensitivity: 100
• Scope Sensitivity: 80
• Gyro: Off
• Gyro Sensitivity: 50
• Button Swap: Off
• Stick Swap: Off
• Trigger Swap: Off
• Rumble: On
• Vibration: Off

AI Options

• AI Learning: On
• AI Aggression: 75
• Prediction: On
• Prediction Strength: 70
• Auto Adjust: On
• Track Stats: On
• Panic Mode: Off

Display and Profiles

• LED Mode: Solid
• LED Brightness: 100
• Advanced LED: On
• Profile: Profile 1

Settings That Persist After Restarting

The script immediately writes only selected settings to persistent variables:

• Aim Assist
• Aim Strength
• Lock Range
• Aim Pattern
• Aim Speed
• Recoil Control
• Recoil Vertical
• Recoil Horizontal
• Recoil Pattern
• Rapid Fire
• Rapid Speed
• Strafe Assist
• Strafe Speed
• LED Mode
• LED Brightness

Most other menu settings reset to their factory values whenever the script reloads.

How to Open the Acid Aim+ V2 Menu

Use the following controller command:

Hold L2 beyond 85% and press Options.

Inside the menu:

• Press Left or Right to move through the 60 settings.
• Press Up to increase or enable the selected option.
• Press Down to decrease or disable it.
• Hold Up or Down to adjust numerical values more quickly.
• Release Circle to close the menu and return to the home screen.

The settings that support persistent storage are saved immediately when changed. There is no separate Save command when exiting.

Recommended Starting Configuration

For the closest factory setup, use:

• Aim Assist: On
• Aim Strength: 100
• Lock Range: 25
• Aim Pattern: Micro Adjust
• Aim Speed: 20
• AI Learning: On
• AI Aggression: 75
• Prediction: On
• Prediction Strength: 70
• Auto Adjust: On
• Recoil Control: On
• Vertical Recoil: 15
• Horizontal Recoil: 0
• Recoil Pattern: Vertical
• Adaptive Recoil: On
• Rapid Fire: On
• Smart Burst: Off
• Strafe Assist: Off
• Optional movement macros: Off

This is the most reliable configuration because it stays within the source’s accepted stored ranges and does not rely on menu options that lack active implementation.

How to Adjust the Values

Begin with the original defaults and change only one value at a time.

When tuning Acid Aim+ V2:

1. Test Aim Strength 100 before lowering it.
2. Keep Lock Range at 25 during initial testing.
3. Leave Vertical Recoil at 15 to avoid the persistent-value range conflict.
4. Keep Horizontal Recoil at zero unless sideways correction is required.
5. Do not rely on Rapid Speed to change the firing pulse in this version.
6. Enable movement macros individually.
7. Remember that many non-persistent options reset after restarting.
8. Match changes to the same weapon, sensitivity and controller setup during testing.

Final Recommendations

The best Acid Aim+ V2 starting values are the factory defaults.

Aim Assist, Recoil Control, Rapid Fire, AI Learning, Prediction, Adaptive Recoil, Auto Adjust and Track Stats are enabled. Most movement and controller-remapping options remain disabled.

The most important values are:

• Aim Strength: 100
• Lock Range: 25
• Aim Pattern: Micro Adjust
• Aim Speed: 20
• Vertical Recoil: 15
• Horizontal Recoil: 0
• Prediction Strength: 70
• AI Aggression: 75
• Rapid Fire: 30ms release and 30ms press

Some OLED options are incomplete or disconnected from active logic in the uploaded V2 source. Keeping those settings at their defaults avoids relying on functions that are not fully implemented.

Use controller scripts in accordance with the rules of the game, platform and online service you are using.