CzenScripts field guide

Best Saint V7 Values for NBA 2K27 Cronus Zen Script

Saint V7 has five saved profiles and separate Rhythm, AutoGreen, No-Dip and fade timing controls. Start with a clean shooting profile, then tune each routine independently.

Shane T 9 min read
Best Saint V7 Values for NBA 2K27 Cronus Zen Script
Before you begin

Start with the recommended baseline, change one value at a time, and test each adjustment under consistent conditions.

Saint V7 is one of the deeper NBA 2K27 Cronus Zen scripts in the current CzenScripts catalog.

Instead of giving you one shooting value, Saint V7 separates Button Rhythm, AutoGreen, No-Dip, fade timing, right-stick shooting and five saved profiles.

We checked the current Saint V7 GPC directly. The best way to configure it is to start with a clean profile, isolate one shooting routine and then add the advanced features after your main timing is consistent.

Best Saint V7 Starting Setup

Saint V7 Setting Recommended Starting Setup
Profile Profile 1
Button Rhythm OFF initially
Rhythm Tempo Tune manually
Turbo Mode OFF initially
RS Shooting OFF initially
Remap Button L3 / LS
Stability Enhancer ON
AutoGreen Shot ON for AutoGreen testing
AutoGreen Speed 100 ms fresh-profile fallback
AutoGreen Tempo 0 ms fresh-profile fallback — tune manually
No-Dip Shot OFF initially
No-Dip Timing 13
Turbo Fades / AutoGreen Go-To OFF initially
AG Fade Speed 1500 ms source fallback
AG Fade Tempo 0 ms source fallback — tune separately
QuickStop OFF initially
Dunk Meter OFF initially
Defense Assist OFF initially
Unlimited Stamina OFF initially
Release Vibrator Optional
Vibrator MS 450 ms

Important: Saint V7 stores settings separately for each of its five profiles. If you have already configured a profile, the saved values can replace the fresh fallback numbers shown above.

Why Saint V7 Needs More Calibration Than Some Scripts

Saint V7 contains several different shooting routines rather than one global shot-timing value.

You can configure:

  • Button Rhythm
  • Rhythm Tempo
  • Turbo / reverse shooting
  • RS Shooting
  • AutoGreen Shot
  • AutoGreen Speed
  • AutoGreen Tempo
  • No-Dip timing
  • AutoGreen fade / Go-To timing

Changing all of these at once makes troubleshooting much harder.

Start With Profile 1

Saint V7 provides five persistent profiles.

Use Profile 1 for your first clean shooting configuration.

A useful organization later could be:

  • Profile 1: Main AutoGreen setup
  • Profile 2: Rhythm setup
  • Profile 3: Fade / moving-shot setup
  • Profile 4: Alternate game-mode timing
  • Profile 5: Experimental values

Those profile purposes are simply an organizational suggestion—the script itself does not automatically assign positions or game modes to each profile.

AutoGreen Shot: Start ON

For the simplest first calibration, use Saint V7's AutoGreen Shot routine and leave Button Rhythm off.

This separates the automated shooting path from the normal Button Rhythm sequence.

Once AutoGreen is behaving consistently, you can build a separate Rhythm profile.

AutoGreen Speed: 100 ms Source Fallback

The current Saint V7 source gives the user-facing AutoGreen Speed control a fresh-profile fallback of:

100 ms

This is the lower end of the available range and should be treated as a source starting point, not a universal perfect value.

Saint V7 allows AutoGreen Speed to be adjusted between approximately:

100 ms and 1000 ms

with both fine and faster menu adjustment options.

AutoGreen Tempo: Tune It Separately

The current source does not provide a trustworthy non-zero universal AutoGreen Tempo recommendation.

A fresh profile falls back to 0 ms.

That does not mean 0 ms should automatically be treated as the best NBA 2K27 value.

Instead:

  1. Get AutoGreen Speed approximately correct.
  2. Keep the same jump shot.
  3. Take several repeatable attempts.
  4. Adjust AutoGreen Tempo gradually.
  5. Test again before making another change.

This is more accurate than copying a Tempo number from Glory V7, TT Scripture V4 or another script whose code is different.

Do Not Copy Glory V7's 39 ms Tempo

Glory V7 has a source-backed 39 ms recommended Tempo starting point.

Saint V7 does not.

Even though both scripts use Rhythm and AutoGreen terminology, that does not make their settings interchangeable.

Use Saint V7's own GPC behaviour as the basis for tuning.

Read our NBA 2K27 Auto Green vs Tempo Shooting guide for the broader difference between these systems.

Button Rhythm: Start OFF

Saint V7's Button Rhythm system converts the normal shooting-button action into a programmed right-stick sequence.

Its Tempo setting controls the delay between stages of that stick movement.

For your first AutoGreen calibration, leave Button Rhythm off.

Once your AutoGreen profile is stable, create or use another Saint V7 profile for Rhythm testing.

Best Rhythm Tempo Value?

The supplied Saint V7 source does not establish a source-backed non-zero "best Rhythm Tempo" number.

The fresh fallback is 0 ms, and the adjustable range extends up to 300 ms.

Because of that, the correct recommendation is to manually tune Rhythm Tempo rather than inventing a number.

If the Tempo movement completes too quickly, increase the value gradually.

If it completes too slowly, reduce it.

Turbo Mode: Start OFF

Saint V7's Rhythm category supports:

  • Off
  • Hop Jumper
  • Turbo Fade

Leave Turbo Mode off during your first standard-shot test.

Once normal shooting is stable, enable the turbo mode you actually use and test it separately.

RS Shooting: Start OFF

Saint V7 also supports right-stick shooting.

The current GPC monitors manual right-stick movement and uses an internal hold threshold of approximately 300 ms before it can complete the programmed shooting sequence.

Keep RS Shooting off until you specifically want to configure that control style.

Remap Button: L3 / LS

The current Saint V7 source uses L3 / LS as its fresh remap selection.

The alternate choice is R3 / RS.

Starting with L3 / LS keeps the control layout consistent while you learn the rest of the menu.

Stability Enhancer: ON

Saint V7's source uses a Stability Enhancer value of 150000 when enabled.

The menu presents this as a simple ON/OFF control rather than requiring you to configure that large internal number manually.

Leave it ON while establishing your main setup.

No-Dip: Start OFF

No-Dip uses a different shooting sequence and should be calibrated independently.

Leave No-Dip Shot OFF while setting up your standard shot.

After the normal AutoGreen configuration is working, enable No-Dip if you specifically want that shot type.

Best Saint V7 No-Dip Value: 13 Starting Point

The current source uses a fresh No-Dip menu value of:

13

This is not displayed directly as milliseconds.

Saint V7 converts that menu value internally.

At value 13, the base calculation is approximately 298 ms, with the routine selecting values around roughly 298–302 ms.

That makes 13 the best source-backed starting point for No-Dip testing.

Why No-Dip Timing Looks Different

Saint V7 does not simply hold one fixed No-Dip millisecond value every time.

Its current source converts the 1–50 menu scale into an internal millisecond range and adds small variation during execution.

For that reason, tune No-Dip using several attempts rather than judging the setting from one shot.

Turbo Fades / AutoGreen Go-To: Start OFF

Saint V7 contains a separate AutoGreen moving-shot / Go-To path with its own timing controls.

For a clean setup, leave this feature off until standard AutoGreen is working.

The source fallback values for this path are:

  • AG Fade Speed: 1500 ms
  • AG Fade Tempo: 0 ms

Again, 0 ms is a source fallback rather than a guaranteed best Tempo value.

AG Fade Speed: 1500 ms Starting Point

The first stage of Saint V7's AutoGreen Go-To / fade routine has an adjustable range from approximately:

500 ms to 3000 ms

The source fallback is:

1500 ms

If you use this shooting path, start there and tune it separately from standard AutoGreen.

AG Fade Tempo Needs Manual Tuning

The second part of the fade routine can be adjusted from approximately:

0 ms to 150 ms

The source fallback is 0 ms.

Do not assume the value that works for your normal Rhythm Tempo should also be used here.

Release Vibrator: 450 ms

Saint V7 includes optional shot-release vibration feedback.

The source fallback is:

450 ms

This can be useful while calibrating, but the vibration is only feedback.

It does not automatically determine NBA 2K27's green release point.

QuickStop: Start OFF

Saint V7 includes QuickStop modes for movement-to-shot sequences.

Keep QuickStop off while testing basic shooting.

Once the standard timing works, enable QuickStop and test the full:

Movement → Stop → Shot

sequence independently.

Dribble Features: Configure Later

Saint V7 also includes configurable D-pad dribbles, Quick Chain and Flashy Burst.

These are useful gameplay controls, but they are unrelated to finding your first shooting value.

Leave them disabled until your shooting profile is working.

Dunk Meter, Defense and Stamina

For initial calibration, leave these additional functions off:

  • Dunk Meter
  • Defense Assist
  • Unlimited Stamina
  • Auto Clicker

This keeps your controller output as simple as possible while troubleshooting shot timing.

Best Saint V7 Calibration Order

  1. Select Profile 1.
  2. Turn Button Rhythm off.
  3. Turn AutoGreen Shot on.
  4. Start from the current AutoGreen Speed value.
  5. Test standard shots repeatedly.
  6. Tune AutoGreen Speed.
  7. Tune AutoGreen Tempo separately.
  8. Save the profile.
  9. Test No-Dip using value 13 as its baseline.
  10. Test fade / Go-To timing at 1500 ms separately.
  11. Create another profile for Button Rhythm.
  12. Add QuickStop, dribbles and other utilities last.

Saint V7 Saves Settings Per Profile

This is one of Saint V7's biggest strengths.

The source saves major configuration values for each profile, including shooting, AutoGreen, No-Dip, QuickStop, dribbles, dunk, defense, stamina and vibration options.

That means you can keep one working profile untouched while experimenting with another.

Do Fresh Profiles Always Show These Values?

The values in this guide are based on the fallback values coded into the current supplied Saint V7 source.

If a profile already contains saved values, Saint V7 loads those saved values instead.

So your OLED may show different numbers if the script has already been configured.

Final Recommended Saint V7 Values

Setting Starting Recommendation
Profile 1
Button Rhythm OFF initially
Rhythm Tempo Manual calibration
Turbo Mode OFF initially
RS Shooting OFF initially
Remap L3 / LS
Stability Enhancer ON
AutoGreen Shot ON
AutoGreen Speed 100 ms fresh fallback, then tune
AutoGreen Tempo Manual calibration
No-Dip OFF initially
No-Dip Timing 13
Turbo Fades / Go-To OFF initially
AG Fade Speed 1500 ms
AG Fade Tempo Manual calibration
QuickStop OFF initially
Release Vibrator Optional
Vibrator Timing 450 ms

Final Answer

The best Saint V7 setup is not one universal millisecond number.

Saint V7 works best when you use its five-profile system to separate different shooting configurations.

For a fresh setup, start with Profile 1, AutoGreen Shot ON, Button Rhythm OFF, Turbo Mode OFF, RS Shooting OFF, L3/LS remap and Stability Enhancer ON.

The source provides 100 ms as the fresh AutoGreen Speed fallback, No-Dip value 13, 1500 ms for the separate AutoGreen fade/Go-To speed and 450 ms for release vibration.

Saint V7 does not provide a source-backed non-zero universal Rhythm or AutoGreen Tempo value, so those settings should be calibrated manually instead of copying values from another script.

View Saint V7 for NBA 2K27 →

You can also browse the full NBA 2K27 Cronus Zen script collection, read our NBA 2K27 Shot Timing Guide, or compare the catalog in our Best NBA 2K27 Cronus Zen Scripts Comparison.

CzenScripts updates

Get new settings guides first

Receive new script guides, setup updates and CzenScripts releases directly in your inbox.