Start with the recommended baseline, change one value at a time, and test each adjustment under consistent conditions.
Looking for the best values for the Mist Personal Fortnite Cronus Zen script? This version is designed as a complete preset rather than a menu-based script, meaning its main values are already built directly into the code.
For the most consistent starting point, leave the script on its original default values. These settings control its stick movement, prediction strength, input thresholds, response scaling, and controller output.
Best Mist Personal Default Values
| Setting | Recommended value |
|---|---|
| Processing timing | -6 |
| Movement pattern | -12, 12, -12, 12 |
| Movement intensity | 12 |
| Fast-response threshold | 40 |
| Activation threshold | 8 |
| Left-stick neutral threshold | 7 |
| Right-stick deadzone threshold | 11 |
| Current movement weight | 18 |
| Recent movement weight | 9 |
| Previous movement weight | 3 |
| Magnitude calculation percentage | 30% |
| Predicted magnitude cap | 100 |
| Direction calculation divisor | 60 |
| Base response strength | 180 |
| Minimum response strength | 35 |
| Maximum base response | 180 |
| High-input threshold | 80 |
| High-input bonus divisor | 2 |
| Maximum response strength | 220 |
| Final output divisor | 1900 |
| Positive stick output limit | 127 |
| Negative stick output limit | -128 |
| Button press output | 100 |
| Button release output | 0 |
Recommended Mist Personal Setup
The recommended setup is to use the script exactly as supplied, with all internal values left at their defaults.
The script automatically changes its response based on how much right-stick input is detected. Lower inputs receive a stronger calculated response, while larger movements are limited and scaled to prevent the final stick output from exceeding the controller range.
Its default prediction balance is:
- Current movement: 18
- Recent movement: 9
- Previous movement: 3
This gives the newest movement information the greatest influence while still using previous stick movement to calculate direction.
Stick Thresholds
The script uses several built-in thresholds to decide when its movement processing should activate:
- Right-stick activation begins above 8
- The faster movement state begins above 40
- Small right-stick inputs below 11 are treated as neutral
- Left-stick movement must remain below 7 for the automatic movement pattern to apply
These are script thresholds and should not be confused with Fortnite’s in-game controller deadzone settings.
Response Strength Values
The response calculation starts from a base value of 180 and changes according to the amount of right-stick input.
The built-in limits are:
- Minimum strength: 35
- Standard maximum: 180
- High-input threshold: 80
- Absolute maximum strength: 220
- Final output divisor: 1900
These values work together as one preset. Changing only one value may affect the balance of the entire response calculation.
Should You Change the Default Values?
For most users, the default values are the best place to start. This version does not include an OLED menu or normal controller adjustment commands, so changing the values requires editing and recompiling the GPC file.
Because the values are interconnected, only make small changes and test one adjustment at a time. Keep an untouched copy of the original script so you can restore the default preset whenever needed.
Final Recommended Values
For the Mist Personal Fortnite Cronus Zen script, use the original built-in preset:
- Movement intensity: 12
- Right-stick threshold: 11
- Prediction weights: 18 / 9 / 3
- Magnitude cap: 100
- Minimum strength: 35
- Base strength: 180
- Maximum strength: 220
- Output scaling: 1900
These are the exact defaults contained in the uploaded script and provide the intended starting configuration for this version of Mist Personal.
