Start with the recommended baseline, change one value at a time, and test each adjustment under consistent conditions.
Lethal Panda Apex V3.3 includes aim assist, recoil control, movement mods, rapid-fire profiles and controller optimizations for Apex Legends.
For the most balanced starting point, we recommend using the script’s original default values. These settings are already configured to provide responsive aim movement without making the right stick feel excessively aggressive.
Both the Primary and Secondary profiles use the same default aim-assist values, so you can begin with either profile.
Best Lethal Panda Apex V3.3 Aim Assist Values
Use the following settings inside the Aim Assist menu:
| Setting | Recommended Value |
|---|---|
| Aim Assist | On |
| Aim Radius | 20 |
| Aim Speed | 18 |
| Fire Radius | 25 |
| Fire Speed | 23 |
The Aim Radius and Aim Speed values control the size and movement rate of the script’s aim-assist pattern.
A radius of 20 keeps the movement controlled, while an aim speed of 18 provides steady activation without making normal aiming feel overly loose. The slightly higher Fire Radius and Fire Speed values strengthen the effect while firing.
Best Recoil Assist Values
Use the following default configuration:
| Setting | Recommended Value |
| Recoil Assist | Off |
| Vertical | 40 |
| Horizontal | 0 |
| Weapon | Automatic |
Recoil Assist is disabled by default because recoil requirements can change considerably between weapons, attachments and optics.
The stored Basic recoil values are:
- Vertical: 40
- Horizontal: 0
These values provide a useful starting point when Recoil Assist is enabled. Begin with the default vertical value and make small adjustments for the weapon you are using. Horizontal recoil should remain at zero unless a particular weapon consistently pulls to one side.
Selecting Automatic allows the script to use its built-in weapon configuration system.
Best Movement Settings
The default movement configuration is:
| Setting | Recommended Value |
| Crouch on Aim | Off |
| Crouch Shot | Off |
| Sprint Slide | Off |
These movement mods are disabled by default so the script does not interfere with regular movement, positioning or manual crouching.
Players who prefer automated movement can test these features individually, but the original disabled configuration provides the most predictable controller response.
Best Options Settings
Use these default options:
| Setting | Recommended Value |
| Auto Ping | Off |
| Auto Reload | Off |
| Auto Sprint | On |
| Block Vibration | Off |
| Easy Flash | On |
| Easy Roll | On |
| Flipped | Off |
| Hair Triggers | On |
| Hip Rapid Fire | Off |
| Inverted Y | Off |
| Profile Switching | Automatic |
| Weapon Display | Off |
Important Default Options
Auto Sprint: On
Auto Sprint reduces the need to repeatedly press the left stick and keeps movement responsive during rotations.
Hair Triggers: On
Hair Triggers minimize the amount of trigger travel needed before the script registers an input.
Easy Flash and Easy Roll: On
These movement-related features are enabled by default to simplify their associated controller actions.
Profile Switching: Automatic
Automatic profile switching allows the script to manage its Primary and Secondary profiles without requiring constant manual changes.
Default Rapid-Fire Timings
The script contains individual rapid-fire timings for supported weapons. These should remain at their original values unless a weapon fires inconsistently.
| Weapon | Default Timing |
| Automatic | 1544ms |
| Anvil I | 1224ms |
| Anvil II | 1016ms |
| Anvil III | 888ms |
| Anvil IV | 1600ms |
| Aphelion | 560ms |
| Arpeggio | 144ms |
| Burletta | 1200ms |
| Hairpin I | 1112ms |
| Hairpin II | 1016ms |
| Hairpin III | 928ms |
| Hairpin IV | 880ms |
| Il Torro I | 1432ms |
| Il Torro II | 1224ms |
| Il Torro III | 1080ms |
| Il Torro IV | 984ms |
| Kettle | 128ms |
| Renegade I | 1336ms |
| Renegade II | 1072ms |
| Renegade III | 888ms |
| Renegade IV | 760ms |
| Venator I | 288ms |
| Venator II | 256ms |
| Venator III | 224ms |
| Venator IV | 200ms |
These timings are built into Lethal Panda Apex V3.3. Avoid making large changes because a value that is too fast can cause skipped or inconsistent trigger inputs.
Device Settings
Use the following default device configuration:
| Setting | Recommended Value |
| Deadzone Right | 5 |
| Device VM Speed | Automatic |
The script’s Deadzone Right value is set to 5. This is an internal script setting and should not be confused with the separate deadzone options available inside Apex Legends.
Leaving Device VM Speed on Automatic allows the script to choose the appropriate processing speed for the connected controller and console.
Complete Recommended Configuration
For the best starting setup, use:
- Aim Assist: On
- Aim Radius: 20
- Aim Speed: 18
- Fire Radius: 25
- Fire Speed: 23
- Recoil Assist: Off
- Basic Vertical Recoil: 40
- Basic Horizontal Recoil: 0
- Weapon Selection: Automatic
- Auto Sprint: On
- Hair Triggers: On
- Easy Flash: On
- Easy Roll: On
- Profile Switching: Automatic
- Deadzone Right: 5
- Device VM Speed: Automatic
- All other optional movement and automation mods: Off
Final Recommendations
The original Lethal Panda Apex V3.3 values provide the best general-purpose baseline. Test the default configuration before adjusting anything.
Controller condition, sensitivity, response curve, weapon attachments and in-game deadzones can all affect how the script feels. When tuning the setup, change only one value at a time and use small adjustments.
For most players, the default aim-assist values should remain unchanged. Recoil values are the most likely settings to require weapon-specific adjustments.
