Start with the recommended baseline, change one value at a time, and test each adjustment under consistent conditions.
Looking for the best EvilBot V6 settings for Black Ops 7? After reviewing the default configuration included with the script, we recommend starting with the original values before making any weapon-specific adjustments.
These settings provide a balanced baseline for testing EvilBot V6 with different weapons, controller types and sensitivity configurations.
Recommended In-Game Deadzone Settings
Before adjusting the script, open your Black Ops 7 controller settings and configure:
- Left Stick Minimum Deadzone: 2
- Right Stick Minimum Deadzone: 2
Low deadzones allow the game to recognise smaller stick movements, which can help the script respond more consistently. Controllers with noticeable stick drift may require slightly higher values.
Best EvilBot V6 Aim Assist Values
Use the following default values inside the Aim Assist menu:
| Setting | Recommended value |
|---|---|
| Zen Polar | On |
| Ghost Tracker | On |
| Human Output | Off |
| ADS Strength | 15 |
| ADS Speed | 20 |
| ADS + Fire Strength | 16 |
| ADS + Fire Speed | 15 |
| Fire Strength | 17 |
| Fire Speed | 30 |
Zen Polar, Ghost Tracker and Human Output are disabled in the original configuration. This gives you a clean baseline from which individual aim-assist features can be tested separately.
We recommend changing only one setting at a time. This makes it much easier to understand which adjustment is affecting your aim.
Default EvilBot V6 Anti-Recoil Values
The script’s Anti-Recoil Toggle is disabled by default, with the Primary profile selected.
Primary Profile
| Setting | Value |
| Vertical Start | 30 |
| Vertical End | 25 |
| Vertical Time | 3000 ms |
| Horizontal Start | 0 |
| Horizontal End | 0 |
| Horizontal Time | 2500 ms |
Secondary Profile
| Setting | Value |
| Vertical Start | 15 |
| Vertical End | 30 |
| Vertical Time | 3000 ms |
| Horizontal Start | 0 |
| Horizontal End | 0 |
| Horizontal Time | 2500 ms |
Ground Loot Profile
| Setting | Value |
| Vertical Start | 30 |
| Vertical End | 15 |
| Vertical Time | 3000 ms |
| Horizontal Start | 0 |
| Horizontal End | 0 |
| Horizontal Time | 2500 ms |
Because recoil patterns vary between weapons, attachments and game updates, these values should be treated as starting points. Test your chosen weapon in a private match or firing range before changing the vertical or horizontal compensation.
Recommended Configuration Settings
The default EvilBot V6 configuration is:
| Configuration option | Value |
| Button Layout | Default |
| Stick Layout | Standard |
| VM Speed | 1 ms |
| Rumble Block | Off |
| Hair Triggers | On |
| Anti-Drift | Off |
| Script Left-Stick Deadzone | 5 |
| Script Right-Stick Deadzone | 5 |
The script’s internal deadzone values remain at 5, while the recommended in-game minimum deadzones are 2 for the left stick and 2 for the right stick.
The internal deadzone values primarily become relevant when the Anti-Drift option is enabled. Leave Anti-Drift disabled unless your controller is producing unwanted movement.
How to Open the EvilBot V6 Menu
To open the OLED settings menu:
- Hold L2 or LT.
- Press Options or Menu.
- Navigate with the D-pad.
- Press Cross or A to enter a submenu.
- Use D-pad Left and Right to change values.
- Press Circle or B to return, save and exit.
You can also hold L2 or LT and press D-pad Right while the menu is closed to cycle between the Primary, Secondary and Ground Loot recoil profiles.
Final EvilBot V6 Setup
For the recommended baseline setup, keep the script at its original default values and set your Black Ops 7 in-game deadzones to:
- Left Stick: 2
- Right Stick: 2
Test the configuration before making changes. Controller condition, sensitivity, field of view, weapons and attachments can all affect how the settings feel.
For more Black Ops 7 options, browse the CzenScripts Black Ops 7 Cronus Zen Script Collection.
