Start with the recommended baseline, change one value at a time, and test each adjustment under consistent conditions.
If you are setting up Avenged MVP for NBA 2K27, the most important thing to understand is that there is no single timing value that will perfectly match every jump shot.
Avenged MVP gives you separate controls for Tempo, Smart Timing, fades, pull-ups, standstill shots and no-dip releases. The best approach is to start from the script's saved values and fine-tune one shot type at a time.
Recommended Avenged MVP Starting Setup
| Setting | Recommended Starting Point |
|---|---|
| Button Rhythm | On if using rhythm-based shooting |
| Tempo | Start at the script's saved value |
| Smart Timing | On |
| Fade Assist | On when tuning fade shots |
| Pull-Up Timing | Start at saved value |
| Auto Stand | On for standstill testing |
| Auto Fade | Enable when testing fades |
| Auto No-Dip | Enable when testing no-dip shots |
| Button Shot Timing | Start at saved value |
| Shot Vibration Cue | On while tuning |
| Fade Vibration Cue | On while tuning fades |
| Release Log | Use while calibrating |
| Profile Slots | Use separate profiles for different builds/jumpers |
Important: the exact millisecond or Tempo values should be calibrated around your NBA 2K27 jump shot rather than copied from another build.
Start With the Saved Tempo Value
Avenged MVP includes an adjustable Tempo control. Instead of immediately changing it, begin with the value already stored in the script and test several consistent standstill shots.
If the release is consistently early or late, make a small adjustment and test again.
Avoid making large jumps in the value. Shot-timing scripts are much easier to tune when you make controlled changes rather than constantly moving between very different settings.
Use Smart Timing
Smart Timing is one of the main Avenged MVP shooting controls and is a good feature to keep enabled while establishing your baseline.
Once your basic timing is consistent, you can move on to the separate shot-type controls rather than trying to force one value to cover every situation.
Best Auto Stand Setup
Start your calibration with Auto Stand.
Standstill shots are usually the easiest shot type to test consistently because you can repeat approximately the same action several times in a row.
- Enable Auto Stand.
- Use the same player and jump shot.
- Shoot from the same general location.
- Watch the shot feedback.
- Check the Avenged MVP Release Log.
- Make a small timing adjustment.
- Repeat until the result becomes consistent.
Once standstill timing is reliable, save that setup to one of the script's profile slots.
Best Fade Assist Setup
Avenged MVP includes both Fade Assist and separate fade-related controls.
Do not tune your fade timing at the same time as your standstill timing. First get your regular shot where you want it, then test fades separately.
Enable Fade Assist, use the same fade animation repeatedly and make small adjustments based on the feedback you receive.
Pull-Up Timing
Pull-up shots can require different timing from stationary shots, which is why Avenged MVP provides a dedicated Pull-Up timing adjustment.
Start with the script's current stored value. If pull-ups consistently release differently from your standstill shots, tune the Pull-Up control rather than changing your main timing and potentially breaking the shot type that already works.
Auto No-Dip Values
Auto No-Dip should also be tuned independently.
If your no-dip shots need correction, adjust the setting dedicated to that shot type rather than changing your complete shooting configuration.
This is one of the biggest advantages of Avenged MVP: it provides separate controls for several shooting situations instead of relying on one universal timing value.
Use the Release Log
The Release Log is one of the most useful tools in Avenged MVP when searching for your best values.
The script can record feedback for standstill, fade and no-dip timing. Use this information to work out whether your current setup needs a small timing adjustment.
A simple tuning process is:
- Take several shots without changing anything.
- Check whether the results show a consistent pattern.
- Adjust the relevant timing setting slightly.
- Repeat the same shots.
- Keep the change only if consistency improves.
This is much more reliable than copying a random value from another player's jumper.
Turn On Vibration Feedback While Tuning
Avenged MVP includes separate shot and fade vibration cues.
These can be useful during setup because they provide additional feedback while you test your timing.
Once your configuration is saved and working consistently, you can decide whether you want to continue using the feedback options.
Button Shot Timing
The script also includes Button Shot with adjustable hold timing.
If you use Button Shot, tune it separately from the other automated shot types. Start at the stored timing and make small corrections based on repeated tests.
Do not assume your Button Shot value should automatically match your Fade or No-Dip setting.
Use the Five Profiles
Avenged MVP includes five saved profile slots, which is particularly useful if you play on multiple builds or use different jump shots.
A practical profile setup could be:
- Profile 1: Main build
- Profile 2: Secondary build
- Profile 3: Alternative jump shot
- Profile 4: Experimental timing
- Profile 5: Backup of your best configuration
This lets you experiment without constantly overwriting the setup that already works.
Best Way to Adjust Avenged MVP Values
The best tuning order is:
- Start with the script's currently saved values.
- Configure your main profile.
- Tune your standstill shot first.
- Use the Release Log to check consistency.
- Adjust Tempo gradually.
- Test Fade Assist and fade timing separately.
- Fine-tune Pull-Up timing.
- Configure No-Dip timing.
- Test Button Shot separately if you use it.
- Save the finished setup to a profile slot.
Don't Change Everything at Once
If you change Tempo, Fade Assist, Pull-Up timing and No-Dip timing simultaneously, it becomes almost impossible to know which change helped.
Adjust one section, test it, then move to the next.
For a more detailed explanation, read our guide to adjusting shot timing on NBA 2K27 Cronus Zen scripts.
Why Someone Else's Values May Not Work
Shot timing can depend on the jump shot, build and shooting situation being used. A value that works well for another player's setup may therefore need adjustment on yours.
That is why Avenged MVP's separate timing controls, Release Log and saved profiles are more useful than trying to find one universal number.
Start from a known baseline, identify whether your shots need earlier or later timing and adjust gradually.
Avenged MVP Features to Configure After Shooting
Once your shot values are dialled in, Avenged MVP also provides:
- Dunk Meter with a configurable controller bind
- Four D-pad dribble assignments
- A large selectable dribble-move library
- Soft Triggers
- Turbo Shot modes
- L3/R3 shot-button remapping
Configure these after your main shooting profile is stable so unrelated changes do not complicate your timing tests.
Final Recommended Avenged MVP Setup
The best Avenged MVP values are the ones calibrated around your specific NBA 2K27 jump shot.
Start with the script's stored timing values, keep Smart Timing enabled, tune Auto Stand first, then calibrate your Fade, Pull-Up and No-Dip settings separately. Keep the Release Log and vibration feedback available while testing and save a working configuration to one of the five profile slots before experimenting further.
View Avenged MVP for NBA 2K27 →
You can also browse the full NBA 2K27 Cronus Zen script collection or compare your options in our NBA 2K27 Cronus Zen script comparison.
