CzenScripts field guide

Best ARK Values for NBA 2K27 Cronus Zen Script

Start ARK with its script-derived 500 ms Auto-Green and 45 ms Auto-Tempo values, then fine-tune shooting before enabling Quickstop, dribbles and other advanced features.

Shane T 8 min read
Best ARK Values for NBA 2K27 Cronus Zen Script
Before you begin

Start with the recommended baseline, change one value at a time, and test each adjustment under consistent conditions.

If you are setting up ARK for NBA 2K27, the best place to begin is with the timing values already built into the current GPC.

We checked the actual ARK script and found its main shooting baseline: 500 ms Auto-Green, 45 ms Auto-Tempo and a 350 ms release-vibration value.

These are useful starting values, but they should still be calibrated around your own jump shot and shooting setup.

Best ARK Starting Values

ARK Setting Recommended Starting Setup
Shot Style Pull-Up to start
Auto-Green Boost ON when testing Auto-Green
Auto-Green MS 500 ms
Auto-Tempo OFF initially
SQ / X Mapping L3 / LS when using Auto-Tempo
RS Auto Tempo OFF initially
Auto-Tempo MS 45 ms
Unlimited Stamina OFF initially
Ultra Quickstop OFF initially
AI Dribbling OFF initially
AI Defense OFF initially
Meter Dunk OFF initially
Release Vibrator Optional while tuning
Vibrator MS 350 ms
Turbo Shots OFF while first calibrating
Instant Responder OFF initially
Spot Take OFF initially
Fade+ OFF initially

Important: 500 ms, 45 ms and 350 ms come directly from the script's built-in configuration. The recommended ON/OFF setup above is designed to make initial calibration easier by reducing the number of active variables.

Best ARK Auto-Green Value: 500 ms

The current ARK GPC uses 500 ms as its built-in Auto-Green MS value.

This should be your first testing point if you want to use ARK's Auto-Green Boost system.

Start with:

  • Auto-Green Boost: ON
  • Auto-Green MS: 500 ms
  • Auto-Tempo: OFF
  • Ultra Quickstop: OFF
  • Turbo Shots: OFF

This isolates the main Auto-Green routine so you can judge its timing without another shooting system changing the input sequence.

How to Fine-Tune 500 ms

Do not make large changes after one shot.

Instead:

  1. Use the same jump shot.
  2. Start at 500 ms.
  3. Take several repeatable attempts.
  4. Look for a consistent timing pattern.
  5. Adjust the value slightly.
  6. Test several more shots.
  7. Save the better value.

Because ARK allows Auto-Green MS to be adjusted directly through its OLED menu, you can make small changes without editing the source file.

Our NBA 2K27 shot timing guide explains the general calibration process in more detail.

Best ARK Auto-Tempo Value: 45 ms

ARK's built-in Auto-Tempo MS value is 45 ms.

This controls a different part of the shooting sequence from the 500 ms Auto-Green value.

Do not treat these as interchangeable:

  • Auto-Green MS: 500 ms
  • Auto-Tempo MS: 45 ms

Auto-Green controls the longer shot-input timing, while Auto-Tempo controls the delay involved in ARK's Tempo-style stick sequence.

Should Auto-Tempo Be On?

For your first setup, we recommend keeping Auto-Tempo OFF while tuning Auto-Green.

Once 500 ms has been tested and adjusted, enable Auto-Tempo and begin testing the 45 ms value separately.

This avoids trying to diagnose Auto-Green and Tempo timing at the same time.

Read our NBA 2K27 Auto Green vs Tempo Shooting guide if you are unsure which shooting system you want to prioritize.

Best Button Mapping for Auto-Tempo

When Auto-Tempo is active, ARK allows the normal shooting input to be remapped to a stick-click input.

The script's initial mapping selection is L3 / LS.

This is a sensible starting option when experimenting with Auto-Tempo because it keeps the alternate stick-click available for other shooting controls.

RS Auto Tempo: Start OFF

ARK also includes RS Auto Tempo.

We recommend keeping this off during the first calibration pass.

First get the normal Auto-Tempo system working at around 45 ms, then test right-stick Auto Tempo separately if you plan to use it.

Release Vibrator: 350 ms

ARK contains an adjustable Release Vibrator timing with a built-in value of 350 ms.

The vibration feature is best treated as a feedback or calibration tool rather than your main shooting timing.

A useful setup while testing is:

  • Release Vibrator: ON temporarily
  • Vibrator MS: 350 ms

Once your shooting configuration feels consistent, you can turn vibration back off if you do not want the extra feedback.

Shot Style: Start With Pull-Up

ARK includes several selectable Shot Style options:

  • Pull-Up
  • Catch
  • Stepback
  • Fadeaway

The current script starts on Pull-Up.

Rather than constantly switching between shot styles during calibration, choose the shot style you actually use and tune your main timing around that setup.

Ultra Quickstop: Start OFF

ARK includes an Ultra Quickstop system with multiple activation modes.

For initial shooting calibration, keep Quickstop off.

After your normal shooting timing is stable, enable the Quickstop mode you want and test the full movement-to-shot sequence.

This matters because Quickstop changes what happens immediately before the shot begins.

See our guide on How Quick-Stop Timing Works in NBA 2K27 Cronus Zen Scripts for a deeper explanation of why Quickstop and shot timing should be tested separately.

AI Dribbling: Start OFF

ARK includes both automatic and configurable dribbling functionality.

Its dribble system supports selectable directional actions, but we recommend leaving it off until the shooting system is configured.

Once shooting is working, configure your preferred dribble sequences and then test how they transition into Quickstop or Auto-Green.

AI Defense: Start OFF While Tuning

ARK includes AI Defense as part of its broader all-round setup.

There is no need to have the defense routine active while testing shot timing.

Keep it off during shooting calibration, then enable it separately if you want the defensive controller routine.

Meter Dunk: Start OFF

ARK also includes Meter Dunk.

Again, it is better to keep unrelated functions disabled while finding your shooting values.

After Auto-Green and Auto-Tempo are working, enable Meter Dunk and test it as a separate controller function.

Turbo Shots: Tune After Normal Shooting

ARK includes a Turbo Shots system with modes including:

  • Off
  • Hop Jumper
  • Turbo Fade

The source script initializes the Turbo Shot system around Turbo Fade, but for a clean first calibration we recommend temporarily switching it OFF.

Get your standard shooting timing working first, then enable Hop Jumper or Turbo Fade and test those shooting situations independently.

Fade+ Should Be Tested Separately

ARK also provides a Fade+ system with several modes.

Because Fade+ changes moving-shot behaviour, leave it off while establishing your main Auto-Green and Auto-Tempo setup.

Once standard shooting works, introduce Fade+ and test it separately.

Recommended ARK Calibration Setup

For your first serious test, use:

Setting Calibration Setup
Shot Style Pull-Up
Auto-Green Boost ON
Auto-Green MS 500 ms
Auto-Tempo OFF
RS Auto Tempo OFF
Ultra Quickstop OFF
AI Dribbling OFF
AI Defense OFF
Meter Dunk OFF
Release Vibrator Optional
Vibrator MS 350 ms
Turbo Shots OFF
Spot Take OFF
Fade+ OFF

Then Test Auto-Tempo

Once your Auto-Green setup is stable, move to a separate Tempo configuration:

  • Auto-Tempo: ON
  • Auto-Tempo MS: 45 ms
  • SQ / X Mapping: L3 / LS to start
  • RS Auto Tempo: OFF initially

Test this independently rather than comparing every shooting mode on the same possession.

Then Add Quickstop and Movement Tools

After the shooting values are set, introduce the movement functions one at a time:

  1. Ultra Quickstop
  2. AI Dribbling
  3. Turbo Shots
  4. Fade+
  5. Spot Take
  6. Meter Dunk

This makes it much easier to identify which feature is responsible if the controller behaviour changes.

ARK's Main Adjustable Values

Based on the current GPC, the most important numeric values for shooting calibration are:

  • Auto-Green MS: 500 ms starting value
  • Auto-Tempo MS: 45 ms starting value
  • Vibrator MS: 350 ms starting value

These are the values to focus on before worrying about ARK's larger set of movement and utility features.

Don't Change Every ARK Setting at Once

ARK is an advanced script with a large configuration menu.

That makes it tempting to enable everything immediately, but doing so makes troubleshooting much harder.

A better order is:

  1. Configure Auto-Green.
  2. Fine-tune 500 ms.
  3. Test Auto-Tempo at 45 ms.
  4. Test Quickstop.
  5. Configure dribbles.
  6. Configure Turbo Shots and Fade+.
  7. Add defense and dunk features.
  8. Save the finished setup.

Are 500 ms and 45 ms Guaranteed to Be Perfect?

No.

These values come directly from ARK's current script and are therefore the best logical baseline for a new configuration, but different shooting setups can still require additional tuning.

Use them as starting values rather than guaranteed universal values.

Final Recommended ARK Values

Main ARK Setting Recommended Starting Value
Auto-Green MS 500 ms
Auto-Tempo MS 45 ms
Vibrator MS 350 ms
Auto-Green Boost ON when calibrating Auto-Green
Auto-Tempo OFF first, then test separately
RS Auto Tempo OFF initially
Ultra Quickstop OFF initially
Turbo Shots OFF initially
AI Dribbling OFF initially
AI Defense OFF initially

Start at 500 ms for Auto-Green, establish a repeatable shot, then test 45 ms Auto-Tempo separately. Only after those two systems are working should you start adding Quickstop, dribbles, Turbo Shots, Fade+ and ARK's other advanced features.

View ARK for NBA 2K27 →

You can also browse the complete NBA 2K27 Cronus Zen script collection, read our Best NBA 2K27 Cronus Zen Script for Shooting guide, or compare the wider catalog in our NBA 2K27 Cronus Zen Scripts Comparison.

CzenScripts updates

Get new settings guides first

Receive new script guides, setup updates and CzenScripts releases directly in your inbox.